In bathrooms, many plumbing fixtures are installed, each of which is connected to water supply and sewage systems. Siphons, taps, counters, hoses and pipes can spoil any interior, so many owners of the premises try to hide them.
A great option for camouflage is the revision hatch for tiles. The main thing here is to choose a suitable structure and mount it correctly. Let's figure out what to look for when choosing a revision hatch and what rules should be followed so that the installed design lasts a long time without complaints about its functionality.
What are the functions of revision hatches?
To mask electrical and piping, as well as the space under the bathroom, special boxes, screens and other similar structures are used.
All of them perfectly close unaesthetic nodes, but the need for access to communications remains. Revision niches serve for this.
In order to easily inspect and repair plumbing fixtures, pipelines, replace meters, they leave audit niches. They are closed with special hatches
Some models of hatches for revision niches were originally designed so that they could be pasted over with the same coatings that the walls were decorated with: wallpaper, tile or panels.
Such structures do not stand out against the background of the walls, so they are called invisible.
There is a lot of space under the bathroom. It is usually covered with a screen, and a technical niche with a hatch. These designs can perform not only camouflage functions. If you attach shelves to the screen, and put large bottles of cleaning and detergents in the inspection niche, you can free up space in the wall cabinet and save useful area
Sometimes niches in the walls serve to store a stock of hygiene products, washcloths, towels and other necessary accessories. They serve as lockers, but do not occupy space in the bathroom.
Such storage niches are also closed with tiled inspection hatches, and they do not attract too much attention.
Technical niches closed by hatches not only mask equipment, but also protect against accidental mechanical damage, moisture, sudden temperature changes
Thanks to invisible hatches, you can give free rein to designer imagination and not worry that pipes or wires hopelessly ruin the interior. They can be hidden and, if necessary, easy to access. The main thing is to periodically conduct technical inspections so that behind the beautiful facade leaks of pipelines or breakdowns of meters do not appear.
Design features of models
Hatches are mounted in different parts of the room - in ceilings, walls, floors. In many ways, the design of each particular model depends on the location of the proposed location. Two main parts are unchanged - the frame and the door, the rest of the elements can vary depending on operating conditions.
Each model has its own design features, but the basic principles of their device are approximately the same: frame, hinges and door
By the size of the technical niche, the model of the sanitary hatch is also chosen. They are usually 20x20-120x120 cm. The frame is firmly installed in the opening, and then the doors are mounted. Most often they are mounted on hinge loops, which can be made of metal or plastic (depending on the material of the frame).
There are two main types of frames:
- Adjustable. The owner can independently choose the size of the frame, and the excess material is simply cut off with a suitable metal tool.
- Unregulated. The size of the hatch is set during its manufacture and is not subject to change.
There are also frameless models. They are mounted using magnetic plates, and the main elements are fixed to silicone sealant or other suitable adhesive compositions. Combined hatches are fixed using a frame and magnetic plates.
The materials from which frames and manhole doors are made are diverse. Aluminum is most often used for frames, and the doors can be made of metal, plastic, aluminum, drywall, expanded polystyrene
Inspection hatches are opened with suction cup handles. Push patterns are also common, which move back after pressing the door plane.
Depending on the location of the niche, you can find a hatch that opens left or right. There are models that shift in the vertical plane.
Image Gallery
Photo from
Floor models are often equipped with a hinged door opener. There are hatches with a removable cover. This design is very convenient if the communications are located under the floor or you need to equip the entrance to the basement. The exterior of the model is finished with tiles, and it becomes completely invisible against the background of the floor surface.
Revision hatches in the ceiling most often hide electrical wiring or important components of the ventilation system. Usually these are models with a powerful hinged mechanism that keeps the doors open. Tile models are rarely mounted on ceiling models so as not to increase weight. Most often, the doors are painted or wallpaper
The size and location of technical niches are planned in advance when a communications connection scheme is being designed. Often it is necessary to install not one, but 2-3 hatches. For example, in the combined bathroom, you will need to leave a revision for the sewer riser, a technical niche for access to the bathroom siphon. Camouflage constructions for water pipes and forced ventilation systems may also be needed.
In many rooms, swing or sliding doors are inconvenient. Then the owners buy or make removable hatches. The advantage of the designs is that they completely open the space of the niche, and repairs can be carried out without fear of hooking or breaking the door. Removable hatches are also tiled.
Tiled floor inspection hatch
Hatch for masking communications on the ceiling
Design of audit niches in the wall
Invisible hatch with removable door
Revision hatches are convenient constructions that perfectly hide communication connection nodes without compromising freedom of access to them. They are easy to install and operate, reliable.
Structures do not need any special care: the surfaces of the doors can be washed with the same means that are used for walls.
Some designs are equipped with powerful opening mechanisms that can withstand significant weight. Such models can be fearlessly finished with even heavy materials, for example, artificial or natural stone.
In the process of using the inspection hatch, it is only necessary to monitor the state of the opening mechanism, lubricate it with engine oil in a timely manner and, as necessary, carry out minor repairs. Then the hatch will last as much as the wall decoration as a whole.
In some cases, you can even replace the tiles on the door surface by carefully dismantling the old coating.
Opening mechanisms
Manufacturers install such door openers:
- swinging;
- push;
- folding;
- movable.
Each type of opening has its own advantages. When choosing, you should focus on ease of use.
Image Gallery
Photo from
This is the most familiar and popular type of door. The hinge hinges of the mechanism are located on the inside of the structure, so they are invisible when the hatch is closed. Manufacturers have provided technological holes in the frame, and the buyer does not have to figure out where it is better to place fasteners. It is important to choose the right size of the door for the tile so that the trim hangs over the edges by no more than 5 mm. If the tile is smooth, a handle in the form of a suction cup is ideal, but for a rough finishing material you will have to choose another option, because suction cups will not stick
This is a great option for opening the door if it is planned to trim it with embossed tiles. The mechanism works like this: when pressed, it is not the door surface that moves forward a little, after which it swings open just like a regular swing door. An important nuance: the doors are pressed with both hands, and the palms should be located symmetrically. Sharp movements should be avoided and pressed gently.
This is a good choice if the audit niche is located in an inaccessible place (behind the toilet tank, next to furniture, large household appliances). The sliding sunroof is pushed forward a little, and then moves to the side. Thanks to a well-thought-out opening system, the doors do not cling to the wall finish and do not damage it. The opening mechanism can be activated by a suction handle or by pressing
Sometimes it is necessary to equip revision openings in places where it is impossible to open or even slide the door without risking damage to the finish, plumbing or furniture. In this case, it is worth taking a closer look at the folding models. They open at an angle. The design provides chains-carabiners that securely hold the door. With this position of the door, you can conduct a surface inspection of communications, but for repairs it is better to completely remove it
Swing door opener
Invisible hatch with push mechanism
Sliding mechanism with three link loops
Access hatch for hard-to-reach areas
It is hardly possible to come up with a more convenient opening mechanism than a swing mechanism. However, auditing is often needed where access is difficult due to equipment or furniture. Then folding and sliding models help out.
If there is a place at least on one side, it is better to choose a sliding mechanism. And for areas with difficult access, hinged structures with the ability to completely remove the door are more suitable.
The nuances of choosing the right hatch
When choosing a size, they are guided by the following parameters:
- Technical Niche Dimensions. The aperture can be slightly paved or expanded, but in general the hatch should correspond to a niche, otherwise access to the equipment will be difficult.
- Door dimensions. The ratio of the parameters of the support frame and the hatch itself may be different. It is necessary to clearly determine how much space is required for a detailed inspection and repair of communications.
- Tile size. Walling materials are usually bought in advance, and this makes it easier to choose a door. The tile should protrude 0.5-0.7 cm beyond the hatch surface (and it is better that the maximum protrusion is no more than 5 mm). It is also important that each tile is securely fixed: more than 60% of its area should be located on the hatch door.
For a spacious bathroom, you can choose a swing hatch, and for a close one, a sliding or folding model is better.
If the opening of the revision niche is located on a plasterboard partition or false wall, then it is worth giving preference to a lightweight hinged structure on an aluminum frame.
A great option is to install a model with gas shock absorbers. Upon purchase, you should carefully check the equipment and make sure that spring mechanisms are provided in it. If not, you will have to buy them separately
There are many manufacturers of inspection hatches whose products are worthy of attention.
The top three invariably include such brands:
- «Phantom". The main advantage of this brand's hatches is powerful reliable hinges that withstand significant loads. Even heavily finished doors do not sag for many years.
- «Hammer". Hammer models feature high-strength frames. The secret of their quality lies in the assembly features: the manufacturer uses argon-arc welding.
- «Glory". These are hatches with wear-resistant fittings that can withstand virtually any finish weight. Doors of models can be revetted with a ceramic tile and even a natural stone. They are not deformed.
The range of invisible hatches is extensive, and for each revision niche there is sure to be a suitable model. It is important not to save money and buy a design with a solid frame and good fittings.
Sometimes technical niches of large sizes are made, for example, if it is necessary to disguise a boiler, distributor, filter, meter, cold and hot water collector, or other equipment as a false wall. Often, a large revision niche is required in the toilet or combined bathroom to service the sewer. If it is not possible to find a hatch of suitable size, then you can resort to other methods of masking communications.
The frames of the two-door inspection hatches are made of durable materials. They must withstand high loads. If the size of the niche is large, and they plan to finish the door with ceramic tiles, it makes sense to order a reinforced structure
If the width of the opening exceeds 70 cm, you can choose a single-door hatch with a sturdy frame and a powerful opening mechanism, but it is better to stay on a two-door model. Most often, such hatches are equipped with push or swing opening mechanisms.
In the second case, the kit also includes suction cup handles.
Some manufacturers have made sure that customers are sure to see the installation instructions. They placed it right on the cardboard in which the models are packed. If you buy a two-door design, you should definitely familiarize yourself with the technology of its installation
The maximum size of a standard two-door model is 120 x 160 cm, but if necessary, an even larger sunroof can be ordered. In this case, you should pre-determine the size of each of the doors.
They are calculated depending on the selected tile: it is necessary that when opening the doors do not cling to each other, but at the same time they are beautifully decorated with finishing material.
Two-door models for tiles can be equipped with any opening mechanism. The most convenient and reliable doors are hinged. However, the location of the revision niche is inconvenient for their opening. Then it makes sense to consider other options
As for the door materials, when choosing two-door inspection hatches, it is better to give preference to models of moisture-resistant gypsum board. The option of drywall should not even be considered, because it will not withstand severe loads, quickly deforms and fails. Its only advantage is cheapness.
Tile hatch installation instructions
The installation of the inspection hatch can be divided into several stages:
- Opening preparation.
- Installation of a frame with doors.
- Finishing the outer surface of the doors.
- Finishing work.
Each of the stages provides for several types of work. To avoid difficulties, we offer useful installation tips with illustrations:
Image Gallery
Photo from
When the hatch is picked up, the opening is measured and adjusted under the frame of the structure. Too large a niche is reduced. Usually a metal profile is used for this. After finishing work, you should try on the hatch and make sure that it becomes in the opening of a niche. No need to leave large gaps: the frame should fit tightly, but not enough to warp
In the finished design, there are usually technological holes. If not, they should be drilled on their own or mounted on a mounting foam. For ease of installation of the hatch, it can first be fixed with a clamp (relevant for niches in drywall partitions). The frame is mounted on the dowels, leveling. If the support frame is made of plastic, it can be installed using glue (“Titanium” is suitable) or liquid nails
To seal the seam, silicone sealants are used.It is best to choose a special sanitary composition with fungicides. It is hygienic, does not contribute to the growth of fungus and mold. The sealant is selected according to the color of the grout and introduced into the seam to its entire depth, the excess is removed and left for polymerization. After the aggregate dries, the seam is cut
Tiles or mosaics are laid either on a special adhesive or on liquid nails. Do not use silicone sealant: this will be a big mistake. A feature of silicone compounds is the elasticity of the finished coatings. Tiles attached to such a material will spring, which will lead to the shedding of the grout. The trim should protrude slightly beyond the bottom of the door (2-3 mm is enough)
Stage 1 - preparing the hatch and opening
Stage 2 - installation of the invisible hatch in the niche opening
Stage 3 - sealing the joint between the structure and the wall
Stage 4 - tiled hatch finishing
After installation, it remains only to make sure that the hatch is functioning properly, the seam is neat, and the tile does not cling to anything when the door is opened. If everything is in order, the design is fully operational.
When buying and installing a revision hatch under a tile, many factors should be considered. In order not to get confused and successfully cope with the task, check out useful video materials on the topic.
The video is devoted to a variety of designs and mechanisms for opening hatches:
Correct size calculation is the most difficult task when choosing the right model. Listen to the recommendations of a specialist:
Any person who has learned to hold tools in his hands can handle the installation of the hatch. However, there are several points that should be given special attention:
The need for inspection hatches arises infrequently: preventive examinations are carried out once every few months. But it is these simple designs that help out in difficult situations, when you need to urgently eliminate leaks, clean the siphon or replace the counter.
Thanks to invisible hatches, you can beautifully decorate the interior without focusing on the elements that provide its functionality.
Choose a revision hatch, but have not yet decided on your choice? Or do you already have experience using such designs and can you give valuable advice to our readers? Please leave comments on this material, ask questions on the topic in the block below.