Modern technological progress practically did not affect cast-iron heating radiators for all 167 years of their existence. Consumers still opt for these devices due to the mass of positive product characteristics.
And even some of the shortcomings do not prevent the installation of cast-iron batteries during the installation of heating systems. Next, we will talk in detail about all the advantages and disadvantages of cast-iron radiators, as well as about the characteristics that you need to pay attention to before buying.
Advantages of Cast Iron Radiators
The use of cast iron batteries has many advantages that make these devices to choose for the installation of heating systems. Some positive qualities are not always voiced by sellers in stores, although they should also be known and taken into account when buying.
Among the advantages of cast-iron batteries, resistance to aggressive parameters of the coolant should be noted. It is due to the material of their manufacture - cast iron does not corrode for a long time even at high temperatures.
Various chemical additives in the coolant, as well as iron oxides formed in the main pipes, also do not lead to the destruction of cast iron.
Image Gallery
Photo from
Cast iron radiators are significantly ahead of their steel, bimetallic and aluminum rivals in terms of thermal performance. They distribute heat most evenly, do not cool down for more than an hour if the system is shut down for repair operations
The minimum life of cast iron batteries is 50 years. Subject to operating rules, they will serve without problems much more
Given the long-term service, cast-iron radiators are produced in retro style. They are actively sought after by designers who prefer aristocratic classics.
Cast iron radiators are extremely resistant to chemical and mechanical stress. They do not rust and do not oxidize, it is impossible to damage them even by blow of a sledgehammer
Cast iron batteries do not have any restrictions whatsoever on connection options and heating systems schemes in which they can be used. However, they are most rational in gravitational systems.
Cast iron heating appliances can withstand pressure during pressure testing up to 12 bar without damage. Depending on the model, they can operate under constant pressure from 6 bar to 9 bar
The construction of heating with cast iron batteries deprives the owners of houses and apartments of the need to install temperature controllers and temperature sensors. They simply are not needed, since the device itself, despite the automation commands, will still heat up and cool down at the traditional pace
A mandatory component of the heating assembly with the lower connection of cast-iron radiators is the Mayevsky crane. In devices with an upper flow of coolant, in the presence of an automatic air vent in the system, a manual device for venting air can be neglected
The device with high thermal properties
Longest Life Batteries
Priority retro style
Radiator adaptable to all types of impacts
Mounting the battery with bottom connection
High Pressure Devices
Mayevsky crane on a cast-iron radiator
In addition to resistance to corrosion processes, such batteries have the following advantages:
- the possibility of repair in case of blockage and leaking;
- inertia of heat transfer;
- reasonable cost;
- the ability to operate at high temperature and high pressure;
- high percentage of heat transfer due to radiation;
- ease of installation;
- long term of work.
Blockages and battery leaks can occur due to the coolant. So, the circulation in cast iron radiators of untreated water with a high content of calcium and magnesium salts leads over time to a narrowing of the internal cavities. This affects the heating rate of the sections and the efficiency of heat transfer.
Cast-iron radiators with designer finishes are produced mainly by European factories, because they are in little demand on the domestic market
In addition, due to the high temperature of the water in the batteries of the old model, intersectional gaskets gradually wear out, and a leak may appear.
The problems associated with the long-term operation of cast-iron radiators can be quickly eliminated in the summer. The internal cavities of the sections are easily cleaned of deposits with a special tool.
Due to the resistance of cast iron to machining, the quality of the radiators does not suffer. When reassembling sections, you can immediately replace worn gaskets.
The increased inertia of the heat transfer of cast-iron radiators is ensured by the weight of the structure and the large internal volume of the coolant.
If steel and aluminum models cool down just a few minutes after the cessation of water circulation, batteries from cast iron continue to effectively heat the room for an hour
As for the cost of one pig-iron section, it is in the same framework as the price of its aluminum or steel counterparts. Therefore, the cost of purchasing batteries from cast iron will be no more than radiators from other materials.
However, cast iron products are much better able to withstand water shocks, and steadily resist short-term pressure increases of up to 16 bar.
The possibility of operation at high temperature and high pressure is provided by a small coefficient of thermal expansion of cast iron. Among all the materials from which the radiators are made, he has the smallest.
Because of this, cast iron is most resistant to microcracks during prolonged use. The same property ensures stable tightness of threaded joints and gaskets at a pressure of 8-9 atmospheres.
And such an advantage as high heat transfer due to radiation, allows you to place cast-iron radiators wall. To maximize the direction of thermal radiation deep into the room, it is recommended to mount special reflectors on the wall behind the battery.
The ribs between the columns are ordinary cast iron plates and do not have internal cavities. Their function is to enhance heat transfer
In addition, cast iron radiators are conveniently and simply mounted. The sections of cast-iron batteries are connected to the pipes and to each other by means of a threaded connection and paronite gaskets. A special key allows you to disconnect any sections without removing the extreme radiators.
And the long term of operation once again confirms the quality and reliability of this heating equipment - cast-iron radiators are guaranteed to last 50 years.
But they will work out such a period only with regular service, which consists in periodically removing internal deposits and replacing gaskets.
The listed advantages of cast-iron batteries make them indispensable in large rooms with an extensive heating network and high working pressure.
Disadvantages of Cast Iron Batteries
Despite the many advantages, cast-iron radiators are endowed with a number of disadvantages. This was facilitated by both structural features and the properties of cast iron itself. For example, cast iron batteries have difficulty integrating automatic temperature control systems.
Due to the inertness of heat transfer, it is quite difficult to control the temperature set in the room. After all, after turning off the boiler, cast-iron radiators will give off their heat for another hour, warming the surrounding air.
It takes about half an hour to reheat the entire mass of the battery and the water it contains. Throughout this period, the room will practically not warm up
There are also other disadvantages, including:
- a large volume of coolant;
- significant weight of one radiator;
- design uniformity.
The large volume of water in the battery has its drawbacks. Warming up the entire coolant requires more time and energy.
In addition, the load on the pump increases, which is forced to pump a significant amount of water in one warm-up cycle.
The cavity volume of the cast-iron battery is at least 2 times larger than that of aluminum and 4 times larger than that of bimetal
The large weight of the devices is also a disadvantage that concerns installers and after-sales services more than residents. However, with self-assembly of the heating system, you can not do without an assistant when attaching a cast-iron battery. The weight of one of its sections is about 7 kg.
Such a minus as designer uniformity is due to the technological features of cast iron casting - they do not allow to create elegant details from this material. Here the batteries look the same.
Due to the simplicity of the design, the energy efficiency of the MC-140 battery models is one of the worst, but the price of such devices is also the lowest
To diversify the lineup, manufacturing companies produce cast-iron radiators with a beautiful pattern on the surface, but their cost is 10-20 times higher than the price of simple models.
However, if there is no money for expensive exclusive models, you can buy ordinary radiators, and then disguise them using a screen for batteries.
Intricate patterns, different heights and widths of radiators provide some variety among radiators more expensive. This allows designers to integrate cast iron batteries into exquisite interiors.
Another disadvantage is the vulnerability of equipment to water hammer. The fact is that cast iron is a durable, but rather fragile material. According to GOST 8690-94, radiators must withstand short-term pressure of 1.5 MPa.
But sometimes the pressure can exceed this value. This occurs when the pump starts abruptly and there are no compensators. As a result, cast iron batteries may crack or burst.
Battery rupture is often accompanied by preliminary clicks and hissing. These sounds should alert and force to block access of the heat carrier to a radiator
In many cases, the advantages of cast iron radiators far outweigh their disadvantages. It is this fact that helps these batteries maintain a good position in the market for heating systems.
Technical characteristics of radiators
Competition in the radiator market is extremely high, so not many manufacturers produce and sell pig-iron batteries in the domestic market.
Before buying, you should familiarize yourself with the technical specifications of the most common cast-iron radiators. This will allow you to choose exactly the products that are most suitable for the planned or existing heating system.
Cast Iron Battery Manufacturers
The market feature of cast iron batteries is a large share of transport costs in their final cost. Therefore, models of manufacturers from far abroad are not represented on the domestic market.
If German batteries are particularly sophisticated, the products produced by ChAZ are not inferior to them in their technical characteristics. Moreover, the batteries of the Cheboksary Aggregate Plant are the best among Russian manufacturers
The main factories that offer cast iron batteries are:
- Adarad (Turkey);
- Cheboksary Aggregate Plant (Russia);
- Viadrus (Czech Republic);
- Demrad (Turkey);
- Minsk Heating Equipment Plant (Belarus);
- KIRAN (Ukraine);
- Konner (China).
There are many European manufacturers of cast iron radiators, but their products are not competitive. It has a high price, and the quality is comparable to domestic samples.
Devices for organizing heating in a vintage style are offered by the St. Petersburg manufacturer:
Image Gallery
Photo from
Exement cast iron radiator
Patting and blackening of the surface
Fidelia Cast Iron Battery - Bestseller
The device for Exemet Neo heating systems
Elegant Exemet Magica Radiator
Classic Exemet Classica
Exemet Mirabella cast iron radiator
Exemet Rococo with a beautiful design
Overall dimensions of radiators
The sizes of radiators in the post-Soviet space were standardized. The distance between the center of the axes of the supply and exhaust pipes was 300 or 500 mm.
The depth of the sections and their width were not regulated and differed from different manufacturers. Most modern radiators are also adapted to these standards.
Cast iron radiators can be selected of any size that is necessary for their placement under the windowsill or in the wall niche
The most common cast iron battery model is the MS-140. It is she who stands in most Khrushchev and nine-story buildings built in the 60-80s of the last century.
The dimensions of its section are: center distance - 500 mm, full height - 588 mm, width - 93 mm, depth - 140 mm.
The wider the sections, the less they are needed to gain the required power, which means that the number of potentially problematic joints is reduced
The main goal of creating cast-iron radiators with various dimensions is to enable the buyer to choose the model that fits into the interior as much as possible. Batteries with a total height of up to 400 mm, for example, fit perfectly into rooms with low sills.
Appearance and arrangement of equipment
Almost all cast iron radiators are typesetting. They are made of gray cast iron and consist of detachable sections that are connected using nipple sleeves. This design allows you to form a solid battery of the required length and power. Between the sections are placed paronite gaskets.
Multi-column cast-iron radiators are difficult for external dust cleaning, which significantly reduces the heat transfer of batteries
In a horizontal plane between sections, water moves in only one direction. Vertically, fluid flow occurs through one or more channels. With their number increases the area of radiators and their power.
The disadvantage of multichannel sections is their high cost and increased hydrodynamic resistance.
The classic look of the "accordion" in radiators is a thing of the past. Due to the predominantly radiative method of heat transfer, manufacturers seek to increase the battery facade area, which translates into a flatter appearance. An example is the Konner Modern500 model.
Konner Modern series cast iron radiators at a low cost have a beautiful polished surface identical to aluminum panels
A number of imported models have decorative patterns on the surface, but the cost of such batteries is incomparably high.
The weight of the cast-iron sections is quite large. The need to maintain the strength of the walls and the maximum heating surface area does not allow engineers to significantly reduce the mass / power ratio. The weight of the section of the standard model MS-140 is 7.1 kg.
The untwisting of sections of cast-iron radiators must be carried out gradually and synchronously from above and from below, otherwise the threaded connection can be permanently damaged
A large mass of cast iron radiators requires good fasteners. Batteries usually do not have special structural elements for fixing to the wall. They simply hang on special brackets that stick in between the sections. There are special feet for installing batteries on the floor.
Image Gallery
Photo from
Mounting the cast iron radiator on the legs
Installing a narrow cast iron battery
Mounting old-style radiators
Increase the distance between the brackets
Thermal power of devices
The power of radiator equipment is characterized by the ability to give off thermal energy at the maximum working temperature of the coolant. This indicator in cast-iron radiators depends mainly on their surface area.
Depending on the model, the power can range from 80 to 200 watts per section. These are passport values, which in real conditions can be much lower.
The recommended power of heating radiators is indicative. For regions with severe frosts, it can be very different from the standard
There is a classic formula for calculating the required power of a cast-iron heating battery, based on the volume of the room: for every 25-30 m3 radiators with a total capacity of 1 kW should be installed. In the presence of 2-3 external walls, this indicator should be adjusted in the direction of increasing power. For more information on how to calculate the required number of batteries for heating, read this material.
To enhance heat transfer due to convection, some models of cast-iron radiators are equipped with ribs between the columns. This design can increase the power section by 20-40%. Keep in mind the need for regular cleaning of such jumpers from dust.
Other equipment specifications
When choosing radiators, you should pay attention to their other characteristics:
- maximum working pressure;
- coolant volume in the section;
- maximum heat carrier temperature.
All of these indicators for cast iron batteries are higher than for aluminum and bimetallic analogues. But the characteristics may differ for different models, which should be taken into account when selecting the components of a new heating system.
Models of Minsk Heating Equipment Plant
Maximum parameters are especially important when replacing batteries connected to a central heating system. During its autumn crimping, excessive pressure is applied to the pipes, which can break inappropriate radiators.
This can result in flooding of both your own and lower apartment, therefore, it is necessary to pay special attention to the working values of pressure and temperature of the coolant.
The presented videos on cast-iron radiators will help in choosing a specific model and further explain their technical characteristics.
Overview of the cast iron radiator:
Comparison of the thermal characteristics of radiators from various materials:
The choice of heating radiators, including cast-iron, should be made with the obligatory consideration of their technical characteristics. This will avoid breaking the heating circuit at maximum loads and provide sufficient heat for the heated rooms.
Please write comments, share your experience with using cast-iron radiators, and ask questions in the box below. We are always ready to clarify incomprehensible points.