If the voltage in our networks met the requirement of 220 V and +/- 10% in both directions, there would be no need to improve its characteristics. Home appliances, including refrigeration equipment, are particularly affected by power surges. The voltage stabilizer for the refrigerator is needed to protect an expensive unit.
You will learn all about choosing a device for protecting the chiller from an unstably supplied power supply from our article. We will talk about the varieties of the device and the rules for its selection. Based on our tips, you can independently install protection against voltage surges and extend its life.
The value of the stabilizer in protecting the refrigerator
No matter what the latest technologies the manufacturers use, no matter how many additional options the unit has, it connects, like its simplest predecessor, to the same 220 V outlet. The input voltage in our networks is far from the best quality.
And the refrigerator is designed so that its individual components are able to function normally only with voltage with normal parameters. Voltage drops are especially dangerous for such an important element of the refrigerator as a compressor.
Its design includes a board responsible for regulating the cooling process, which is the most vulnerable spot. As a result of a sudden increase in the voltage index, this expensive element can fail.
A voltage stabilizer is needed when operating a refrigerator connected to a network with characteristic power surges. For example, when connected to old networks or a diesel generator
For the motor windings, both the prolonged presence of a low voltage and the long influence of a large inrush current due to a prolonged activation process at a low voltage are dangerous. As a result of exposure to high temperatures on the windings, it is very likely that the insulation will melt.
Voltage correction is required not only for modern samples of refrigeration equipment. Models of refrigerators released long ago are not equipped with protection against premature start.
Therefore, when the voltage is turned off and immediately abruptly turned on, the crank-rocker pair of the compressor suffers as a result of water hammer in the space above the piston. The stabilizer will turn off the power when the output voltage reaches its maximum, it will provide a delay before the next compressor starts.
Like other household appliances, refrigerated cabinets for products are designed for continuous operation at normal voltage. When the voltage in the network has a significant difference from the nominal, one can not do without a stabilizer
Before deciding to purchase a stabilizer, you need to make sure that the purchase is worthwhile. To do this, study the parameters of the existing electrical network. It is recommended to measure the voltage during several days during peak consumption.
It is advisable to use devices that fix the current voltage. Foreign manufacturers designate this feature as True PMS. If, according to the measurement results, it turns out that the controlled parameter did not exceed the limits of 205-235 V, the stabilizer will be needed only for a new expensive model of the refrigerator.
Its elements are especially sensitive to differences. The situation is considered critical when the voltage deviations in the direction of increase exceed + 10% or -15% in the direction of decrease.
According to the GOST No. 32144-2013, indicated in clause 4.2.2, with voltage surges up to 10%, a stabilizer is not required for the refrigerator to operate. That is, when the network supplies an alternating voltage in the range 198 - 242 V, the stabilization device may not be used
In this case, the connection of the stabilizer is a prerequisite. Most of the new models are equipped with built-in voltage stabilizers.
Their reliability is in doubt, because in practice, with large network congestion, they do poorly with their task. In a critical situation, they themselves can be damaged and the unit will remain completely unprotected.
Types of stabilizers for the refrigerator
Devices designed to stabilize the voltage differ both in design and in the output power, the principle of operation. According to these signs, three types of stabilizers for the refrigerator are distinguished: electromechanical, they are also servo-driven, relay, triac or electronic.
In the photo there are all three types of stabilizers: servo-drive - the cheapest, relay, electronic - the most reliable, stable, but also expensive
Subdivide stabilizers by type of power grid. They can be single and three phase. The first have compact dimensions, and as in their design there is no cooling fan, they are almost no noise during operation. The output voltage is monitored continuously, but the response level to the input voltage is quite low.
Three-phase stabilizers designed for heavy loads have been developed for houses powered by a 380 V power supply, but when one of the phases fails, the protective mode does not work. Depending on the type of voltage in the network, the devices are divided into operating with a voltage of low, high and spasmodic.
1. Electromechanical devices
Servo-driven devices control the drive of the current collector and control the voltage parameters through an electronic board. High accuracy is their main advantage, the error is only 2-4%. The disadvantage is the speed caused by the inertia of 10-20 volts.
Electromechanical stabilizer - inside view. The slider, moving along the turns of the winding, changes the output voltage. A large number of nodes makes such devices short-lived
Such a stabilizer works well in conditions of either a slowly changing voltage, or stably low, or too high. With strong spasmodic drops, the device will quickly become unusable. Such conditions are most often observed in cottages, in country cottages, so this option is not suitable here.
2. Relay type stabilizer
A simple relay stabilizer control system can withstand significant swings. On its electronic unit, as well as on the controller, there are power relays that are responsible for switching the transformer windings. The transition takes place extremely quickly - in just 0.5 seconds.
In the photo, a relay type stabilizer. This equipment is the most common in everyday life. Often, consumers are attracted by its relatively low cost.
The weak link is the microcontroller. It can burn out, unable to withstand excessive mobility of the input voltage.
The work of switching the steps of the transformer is accompanied by clicks, which does not add comfort in the house. Such models are intended for use in networks where a fast voltage reset occurs continuously.
3. System models of devices
There is no such element as a relay in the electronic stabilizer, the control is controlled by seven-voltors that quickly respond to the slightest changes in the network. The absence of mechanical contacts makes it possible in the event of a power failure to carry out multiple switching silently.
Thyristor stabilizer SKAT ST-12345. It covers an extensive input voltage plug, is characterized by high power and stabilization rate, meets all domestic and international standards
They withstand voltage overloads of up to 20% for 12 hours, and up to 100% for one minute. Manufacturers of system stabilizers make high demands on the quality of parts and the accuracy of assembly, therefore both the durability and the cost of the devices are appropriate.
Criteria for choosing a device for stabilization
The main criterion for choosing is power. This is followed by indicators such as voltage stabilization stages, response speed, accuracy and range. Auxiliary parameters - noise level, input voltage, the presence of additional options.
In choosing a device for voltage stabilization, in addition to cost and sound level, you should pay attention to the speed of correction of network parameters and reliability (+)
Calculation of the power of the stabilizer
This parameter is very important for the stabilizer. Here we mean the total power at the input under conditions of a voltage of 220 V. The active power characteristic of the refrigerator can be found from its passport, but the total power is involved in the calculations.
Since the refrigerator is an induction component, we are dealing with a reactive load in the circuit and an additional indicator - cos φ. This parameter can be found in the equipment certificate.
The total power is equal to the quotient of dividing the active power in watts by cos φ, which for the refrigerator is 0.9. If this value cannot be found, then the power should be divided by 0.7.
The refrigerator at startup has a large starting current, sometimes exceeding the rated current up to 5 times. For this reason, a three-fold increase in total power occurs. So, for a refrigeration unit with a power of 600 W, the maximum power will be: (600 x 3): 0.9 = 2000 W. Active power is added to the maximum power and the device power is obtained.
Since the stabilizer is a low-inertia device with a quick response to any changes in the load or the input network, it needs some power reserve. Otherwise, starting the motor-compressor of the refrigerator will cause the protective function to operate due to overload.
The diagram clearly illustrates how the starting current values exceed the operating parameters. Let this be a short-term load, but it can not be neglected (+)
If the starting and rated power are known, it is possible to approach the calculation in a different way. For example, a Wirlpool ARC4020 refrigerator with a rated power of 200 watts and a starting power of 1000 watts.
You need to find the difference between these values: 1000 - 200 = 800 watts. Maximum power will be: 200 + 800 = 1000 watts. Given a 20% margin, the required stabilizer power is found: 1000 x 1.2 = 1200 W = 1.2 kW.
If the stabilizer is planned to be installed not only for the refrigerator, but for all electrical appliances in general, the calculation of its power is performed according to the parameters of the machine. To do this, the voltage is multiplied by the amount of current that is found on the marking of the machine. When the voltage is 220 V and the current is 16 A, the stabilizer should have a voltage of 3520 W.
The power of the stabilizer should provide an adjustment of the starting currents of the compressor of the refrigerator or a group of devices launched simultaneously
Speed selection
An unstable network requires a device with a high reaction rate. Therefore, the electromechanical stabilizer of the old type, operating on the basis of the LATR principle, is inappropriate in such conditions, because It has a low stabilization rate.
When a jump appears on the network, the time period for setting the value can be delayed up to three seconds. In the conditions of a surge of very high voltage, the refrigerator will have time to fail.
A trip speed sufficient to protect the refrigerator from power surges is considered to be 10 - 20 ms. For 20 milliseconds, just one period of the voltage supplied by the household network is laid in
This drawback does not compensate even the high accuracy of the device. If we make a choice between a relay and a seven-phase stabilizer with this parameter, then their reaction to voltage drops is almost the same. In this case, the first type of device will cost less. The advantage of the second is absolute noiselessness.
Accuracy and stabilizer range
In the labeling of these devices, there is always such a parameter as accuracy. It is designated by the symbols "U", which means narrow and "Fri" - increased accuracy. There is also a marking in the form of the symbols "PTT", "PTTT".
For the refrigerator, the first two are usually chosen. The second two are necessary for equipment used in medicine in the case of large range fluctuations.
A wide range of operating voltages is a good characteristic for a stabilizer. Typical plug - 120 - 300 or 100 -260 V. When choosing a suitable device, you can use this graph (+)
Among the three types of stabilizers, the dynamic type is most accurate. In the other two, voltage changes are stepwise. It is really impossible to get exactly 220 volts, at the input it will be either a little in the plus or a little in the minus in relation to the nominal. But these values will not exceed the tolerance laid down in GOST clause 4.2.2 of GOST 32144-2013.
Input voltage and other parameters
In domestic networks, a deviation from the standard 220 V is allowed, but not more than 10%. If you are sure that the tolerance will not be exceeded, then you do not need to buy a stabilizer, but this happens very rarely. Significantly more often, the spread of voltage values ranges from 140 to 270 V, or even more.
For this reason, when choosing a device, you need to look at the documentation. Here you will find the permissible input voltage range, and it is different for each model. Other parameters include noise level, input voltage geometry.
For the most popular models of refrigerators, you can choose a stabilizer using this table. Here the device power is tied to the compressor power (+)
If a smooth sinusoid is needed for the device to work, then this point should be key when choosing a device. A plus for the stabilizer is the presence of such an option as bypass mode. This function paves the way for input voltage input directly.
If the voltage in the network complies with the regulation, it goes to the refrigerator directly. In case of deviations from the nominal value, the stabilizer is included in the circuit.
Features of installation and connection of the stabilizer
In the stabilizer passport, manufacturers indicate the temperature regime that is optimal for its operation. The lowest temperature threshold for household single-phase devices is + 5⁰, for three-phase -5⁰С. The upper limit is + 45⁰. The heat generated by the stabilizer during operation is removed by ventilation - natural or forced.
In order for this system to function normally, the case of the device with ventilation holes is removed from the building envelope by a distance of about 0.5 m. If the stabilizer is not very heavy, it can be placed on a shelf or on a table, there are also suspended models.
A device of a sufficiently large weight is placed on the floor, but so that under it there is no soft coating, worsening the conditions for normal ventilation. It is not recommended to have a stabilizer near the bedroom, as even with low noise, it will still interfere.
In the diagram, the stabilizer in the network voltage of 220 V when connected at the entrance to the building. Position it immediately behind the counter and before loading
To supply normal quality power to the refrigerator, single-phase stabilizer models are used. As a rule, their power does not exceed 3 kW.
I have individual devices of this type on the back of the case one or two sockets and a cord with a plug. To connect the appliance to the network, you do not need to be a specialist. The plug is simply inserted into the outlet, and then the refrigerator is turned on through the stabilizer.
It happens that the case is equipped with only terminals, then the cord and plug are purchased additionally. The ends of the first are screwed to the terminals.
To fix the position of the electronic keys or brushes at which the supply of stabilized current begins, the stabilizer is first momentarily turned on.After the voltmeter readings stop at 220 V, the device is immediately turned off.
It remains to connect the wire with the outlet to the outlet, and the refrigerator into it. If 380 V is connected to the house, one three-phase stabilizer is installed, then its effect will extend not only to the refrigerator, but also to other electrical appliances. Another option is also used - three single-phase stabilizers with a star connection.
Safe operation
It should not be forgotten that the device does not have protection against moisture entering its body. Therefore, do not put any dishes with liquid on it, nor wipe it with a damp cloth. Detergents are also contraindicated in care.
The stabilizer will help to fix many problems in the home network, but in the process of its operation, electrical safety equipment must be observed
The electrical safety rules strictly prohibit the contact of the case with metal surfaces. Also, ventilation grilles must not be allowed to close, otherwise the device will overheat with a further failure.
Danger to the stabilizer and overload. It can occur when, in addition to the refrigerator, some other home appliances that are not taken into account when performing power calculations are connected to it.
If such a connection is necessary, you must first check to see if the total load exceeds the permissible limit. In any case, to protect several devices, it is better to purchase a voltage stabilizer for the house with characteristics calculated for their work.
Manufacturers and models of stabilizers
The first place in the rating of household stabilizers is taken by the RUCELF SRFII-6000-L relay device of domestic production. Its design takes into account all the features of our electrical networks. It works stably in the voltage range from 110 to 270 V.
Power stabilizer RUCELF SRFII-6000-L - 5 kW, efficiency - 98%. The voltage equalization process is very fast, but the cooling system is noticeably noisy
Among the high-quality devices offered by the International brand RUCELF, there are other good models. In particular, the RUCELF SDWII-6000-F compact vertical stabilizer of relay type with a power of about 6 kW is popular.
It is silent in operation, is fast-acting, emits little heat, works in the range of 145-265 V. Its price is quite high, but there are additional options: delayed start, bypass, self-diagnosis system.
As a budget option, you can consider the Teplocom ST-555 Bastion model. It is designed for a wide voltage range, but the accuracy indicator is quite low - 8%. The device weighs only 2 kg.
The Teplocom ST-555 bastion is the best option for small objects with autonomous networks. It is compact, has wall placement, has a power of 7 kW.
If the noise does not frighten, then the Luxeon WDR-10000 model is quite acceptable for use in everyday life. Despite the Chinese assembly, the device works stably, has a stylish design. For both office and home use the wall-mounted Sven AVR PRO LCD 10000.
The Sven AVR PRO LCD 10000 is a voltage correction device for powering an extensive range of home appliances. It is equipped with a small LED indicator, which displays the characteristics of the incoming / outgoing current, the status of the device, there is a pause function and protection against short circuit and overheating
It has small dimensions, but heavy (18.5 kg), because high-quality components were used for assembly. The unit is noisy, but the voltage evens out smoothly. Since its power is high, it cannot be connected to a conventional outlet. When connecting, special terminals are used. There is no bypass in the design.
Material about the features of the choice of stabilizer:
How to calculate power correctly:
Stabilization of voltage is a topical issue. By purchasing such a device, you can extend the life of the refrigerator and other home equipment. Regret the acquisition can only make the wrong choice of stabilizer.
Please write comments in the block below, ask questions, post a photo on the topic of the article. Tell us about how CH was selected to protect the refrigerator from power surges. Perhaps your advice will provide effective assistance to site visitors.